Low headroom hoists
Low Headroom Hoists
Choose a Configuration
SEAGULL low headroom hoists combine a manual chain hoist with a trolley. Compare DJK, GCLB, and LDDP/LDDG as complete assemblies, using the beam dimensions and required hook position to define the installation.
Compare the Assemblies
| Series | Listed load range | Configuration to review |
|---|---|---|
| DJK | 1–10 t | Integrated assembly with a 3 m listed lifting height and model-specific beam widths |
| GCLB | 1–10 t | Hoist and geared trolley assembly with H dimensions by model |
| LDDP / LDDG | 0.5–2 t | Push or geared trolley versions with shared lifting-load and H entries |
Here, t means metric tonnes. Read the dimensions on the drawing for the selected assembly. Dimension letters and reference points vary among these series.
Specify the Required Hook Position
Send a beam cross-section and a drawing showing the required raised hook position. Include the available side space and the distance the load must travel along the beam. These inputs distinguish a headroom requirement from lift height alone.
Choose the Trolley Operation
LDDP uses push travel; LDDG uses hand chain driven travel. Their shared load and H entries do not make their complete dimensions identical. Compare the travel arrangement and the assembly drawing together.
For a trolley to pair with a separate hoist, use the independent trolley range.
Request a Complete Assembly
Provide the load, required lift, beam drawing, available headroom, and travel method. Identify the series if known, with quantity and destination.