DHQT uses a locking-latch arrangement for horizontal plate and profile handling. The configurations below list capacities from 2t to 12t per pair, including three opening variants at 8t and two at 12t.
The series literature describes a latch that can lock the clamp closed. It specifies pairs for girder handling and slings with three or more clamps for sheets and bundles of sheets. Include the workpiece and lifting layout for review.
The 8t entries list 0–40, 10–70, and 30–90 mm openings. The 12t entries list 20–80 and 40–100 mm. Include the complete opening range with the designation when requesting a model.
| Catalog model designation | Catalog capacity (t per pair) | Jaw opening A (mm) | B (mm) | C (mm) |
|---|---|---|---|---|
| DHQT 2t | 2t | 0-30 | 280 | 177 |
| DHQT 3t | 3t | 0-38 | 320 | 209 |
| DHQT 5t | 5t | 0-40 | 380 | 258 |
| DHQT 8t | 8t | 0-40 | 380 | 258 |
| DHQT 8t | 8t | 10-70 | 529 | 340 |
| DHQT 8t | 8t | 30-90 | 529 | 360 |
| DHQT 12t | 12t | 20-80 | 549 | 350 |
| DHQT 12t | 12t | 40-100 | 549 | 370 |
B and C are the dimensions marked on the series drawing. The capacity column retains the catalog t unit and applies per pair. It does not define a total assembly rating for slings with three or more clamps; provide the load and sling layout for that review.
For dimensionally stable plate or profile handling, provide the contact thickness, load geometry, and proposed attachment points. The minimum opening is especially relevant when comparing the 8t and 12t variants.
Send the DHQT designation, minimum and maximum opening required, workpiece drawing, total load, and rigging layout. Include quantity and destination.
For a product quote, include the load and unit, lift height, quantity, and electrical supply where relevant. For distribution or integration, describe the product range and market you work with. For product information or support, identify the model and describe your question.
Fields marked * are required.
This form is not connected. Please email your inquiry to info@seagullhoist.com.
